Circulating Water Bath with Cooler Unit Manufacturer,Supplier and Exporter in India

Circulating Water Bath with Cooler Unit

Product Code : EL-CTLE-10367
Engineering Labs Equipment is a leading Circulating Water Bath with Cooler Unit Manufacturer,and suppliers in India, Circulating Water Bath with Cooler Unit Uruguay (Montevideo), Circulating Water Bath with Cooler Unit Uzbekistan (Tashkent), Circulating Water Bath with Cooler Unit Venezuela (Caracas), Circulating Water Bath with Cooler Unit Vietnam (Hanoi), Circulating Water Bath with Cooler Unit Yemen (Sana'a), Circulating Water Bath with Cooler Unit Zambia (Lusaka), Zimbabwe (Harare), Eswatini (Mbabane) (Lobamba), Ethiopia (Addis Ababa), Fiji (Suva), Gabon (Libreville), Gambia (Banjul), Georgia (Tbilisi), Ghana (Accra), India (Delhi, Mumbai, Kolkatta, Chennai), Indonesia (Jakarta), Iraq (Baghdad), Ivory Coast (Yamoussoukro), Jamaica (Kingston), Jordan (Amman), Kazakhstan (Astana), Kenya (Nairobi), Kiribati (Tarawa), Kosovo (Pristina), Kuwait (Kuwait City), Kyrgyzstan (Bishkek), Laos (Vientiane), Latvia (Riga), Lebanon (Beirut), Lesotho (Maseru), Liberia (Monrovia), Libya (Tripoli), Lithuania (Vilnuis), Luxembourg (Luxembourg), Malawi (Lilongwe), Malaysia (Federal Territory of Kuala Lumpur), Maldives (Malle), Mali (Federal Territory of Kuala Lumpur), Malta (Male), Mauritania (Nouakchott), Mauritius (Port Louis), Mexico (Mexico City), Mongolia (Ulaanbaatar), Bulgaria (Sofia), Burkina Faso (Ouagadougou), Burundi (Gitega), Cambodia (Phnom Penh), Cameroon (Yaoundé), Cape Verde (Praia), Central African Republic (Bangui), Chad (N'Djamena), Chile (Santiago), Colombia (Bogota), Comoros (Moroni), Congo (Kinshasa), Costa Rica (San José), Croatia (Zagreb), Cuba (Havana), Cyprus (Nicosia), Czech Republic (Prague), Denmark (Copenhagen) ,Djibouti (Djibouti City), Dominican Republic (Santo Domingo), DR Congo (Kinshasa), Ecuador (Quito), Egypt (Cairo), El Salvador (San Salvador), Equatorial Guinea (Malabo), Eritrea (Asmara), Estonia (Tallinn)

This multi-purpose digital unit, fit with cooler unit and recirculating water system, is used to condition in water asphalt specimens for Marshall and Indirect tensile test. 
The EN 12697-23 covering the Determination of the indirect tensile strength of bituminous mixtures, prescribe a water conditioning temperature of 5°C or from 5 to 25°C which are obtainable with a cooling system. 
All the other standards require conditioning temperatures from 25 to 60 °C. 
This unit can also be used for many applications either for Asphalt or for Cement testing for curing in water cement specimens 40x40x160 mm, and for storing the hydrated samples at a temperature of 20°C.  
Ideal for conditioning Asphalt specimens for Marshall and Indirect tensile tests.
Ideal for cement specimens cure in water.
Internal surfaces are polished stainless steel with a sheet steel insulated outer case. 
The cooler unit is located under the water bath. 
Complete with re-circulating unit for temperature uniformity.

Specifications :
Automatically maintains the set temperature
Two channels electronic thermo regulator: heating/cooling with digital display
Complete with recirculating unit
Incorporating refrigeration compressor
Power: 2000 W
Temperature range: +5 to +60°C
Accuracy: ± 1%
Capacity: 40 l
Inside dimensions: 550x360x200 mm
Outside dimensions: 830x480x950 mm
Weight approx.: 62 kg

Standards: EN 12697-34 | ASTM D1559 | ASTM D5581 | AASHTO T245 | EN 12697-12 | EN 12697-23 | ASTM D6927

Contact ELE for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best and renowned civil engineering lab equipment manufacturer, civil engineering lab equipments exporter, civil engineering lab equipment supplier, chemical engineering lab instruments, civil engineering lab equipments suppliers, civil engineering lab equipments exporters in Ambala, India.

   

Office Address

Works: LEO SHOPPING COMPLEX, 1ST FLOOR RESIDENCY ROAD,
BANGALORE 560025 Karnataka

[email protected]

Follow Us