Dial Type Vernier Caliper Manufacturer,Supplier and Exporter in India
Product Code : EL-MAILE-10868
Engineering Labs Equipment is a leading Dial Type Vernier Caliper Manufacturer,and suppliers in India, Dial Type Vernier Caliper Uruguay (Montevideo), Dial Type Vernier Caliper Uzbekistan (Tashkent), Dial Type Vernier Caliper Venezuela (Caracas), Dial Type Vernier Caliper Vietnam (Hanoi), Dial Type Vernier Caliper Yemen (Sana'a), Dial Type Vernier Caliper Zambia (Lusaka), Zimbabwe (Harare), Eswatini (Mbabane) (Lobamba), Ethiopia (Addis Ababa), Fiji (Suva), Gabon (Libreville), Gambia (Banjul), Georgia (Tbilisi), Ghana (Accra), India (Delhi, Mumbai, Kolkatta, Chennai), Indonesia (Jakarta), Iraq (Baghdad), Ivory Coast (Yamoussoukro), Jamaica (Kingston), Jordan (Amman), Kazakhstan (Astana), Kenya (Nairobi), Kiribati (Tarawa), Kosovo (Pristina), Kuwait (Kuwait City), Kyrgyzstan (Bishkek), Laos (Vientiane), Latvia (Riga), Lebanon (Beirut), Lesotho (Maseru), Liberia (Monrovia), Libya (Tripoli), Lithuania (Vilnuis), Luxembourg (Luxembourg), Malawi (Lilongwe), Malaysia (Federal Territory of Kuala Lumpur), Maldives (Malle), Mali (Federal Territory of Kuala Lumpur), Malta (Male), Mauritania (Nouakchott), Mauritius (Port Louis), Mexico (Mexico City), Mongolia (Ulaanbaatar), Bulgaria (Sofia), Burkina Faso (Ouagadougou), Burundi (Gitega), Cambodia (Phnom Penh), Cameroon (Yaoundé), Cape Verde (Praia), Central African Republic (Bangui), Chad (N'Djamena), Chile (Santiago), Colombia (Bogota), Comoros (Moroni), Congo (Kinshasa), Costa Rica (San José), Croatia (Zagreb), Cuba (Havana), Cyprus (Nicosia), Czech Republic (Prague), Denmark (Copenhagen) ,Djibouti (Djibouti City), Dominican Republic (Santo Domingo), DR Congo (Kinshasa), Ecuador (Quito), Egypt (Cairo), El Salvador (San Salvador), Equatorial Guinea (Malabo), Eritrea (Asmara), Estonia (Tallinn)
In machine-shop usage, the term “caliper” is often used in contradistinction to “micrometer”, even though outside micrometers are technically a form of caliper. In this usage, “caliper” implies only the form factor of the vernier or dial caliper.
A caliper is a device used to measure the distance between two opposite sides of an object.
A caliper can be as simple as a compass with inward or outward-facing points.
The tips of the caliper are adjusted to fit across the points to be measured, the caliper is then removed and the distance read by measuring between the tips with a measuring tool, such as a ruler.
It is used in many fields such as mechanical engineering, metalworking, forestry, woodworking, science and medicine.
FEATURES:
New designed dial movement for ultra smooth sliding and high shock protection.
Can measure OD, ID, depth, and steps.
Lock screw for dial bezel and for holding the sliding jaw position.
Models available with carbide-tipped OD and ID jaws.
Supplied in fitted plastic case.
SPECIFICATION:
The measuring range of a caliper is the difference between the largest value and the smallest value that it can measure.
The measuring range of most dial calipers is 150mm (6 inches), although calipers with ranges of between 100mm (4 inches) and 300mm (12 inches) are also available.
The graduation of a dial caliper is the smallest distance it can measure; the value of a minor increment on the dial scale.
The graduation of most dial calipers is 0.02mm for metric versions, and 0.001 inches for imperial dial calipers.
Graduation is normally indicated on the face of the dial.
When selecting a caliper, bear in mind the approximate size of the object you are measuring.
To measure larger objects, you will need a caliper with a larger measuring range.
Contact ELE for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best and renowned engineering lab equipments, engineering equipment manufacturer india, engineering equipment india, chemical engineering lab equipments, control engineering laboratory equipments, control engineering laboratory equipment, control engineering lab equipment in Ambala, India.
