Mortar Grinder
Product Code : EL-ELI-11033
Mortar Grinder (code EL-ELI-11033) is a laboratory mill for grinding, mixing and triturating powders, suspensions and pastes, including highly viscous ones, dry or wet, to an analytical final fineness of approx. 10 µm. It takes feed up to 8 mm in batches of 10 to 190 ml in a 700 ml grinding chamber, reduces the material by pressure and friction, and draws 250 W at 230 V, 50 Hz or 290 W at 120 V, 60 Hz on a 1-phase connection.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Use | Mixing and homogenising powders, suspensions and pastes, including those of high viscosity, for reproducible sample preparation to analytical fineness |
| Applications | Grinding, mixing and triturating, dry and wet |
| Feed material | Soft, hard, brittle, pasty |
| Size reduction principle | Pressure, friction |
| Feed size | Max. 8 mm |
| Batch size / feed volume | 10 to 190 ml |
| Final fineness | Approx. 10 µm |
| Grinding chamber volume | 700 ml |
| Grinding set | Can be cooled and heated |
| Drive | Motor drive with electronic control, used in place of a hand mortar |
| Grinding tool materials | Hardened steel, stainless steel, tungsten carbide, agate, sintered aluminium oxide, zirconium oxide, hard porcelain |
| Application examples | Ashes, cement clinker, chemical products, coal, cocoa nibs, coke, drugs, food, homeopathic materials, nuts, pharmaceutical materials, plant materials |
| Fields of application | Agriculture, biology, chemistry/plastics, construction materials, food, geology/metallurgy, glass/ceramics, medicine/pharmaceuticals |
| Supply requirements | 220–240 V, 50 Hz |
| Electrical supply versions | Different voltages |
| Power connection | 1-phase |
| Power consumption | 250 W (230 V, 50 Hz) / 290 W (120 V, 60 Hz) |
| Product code | EL-ELI-11033 |
| Manufacturer | Engineering Lab Equipment, Ambala, Haryana, India |
What Is the Mortar Grinder Used For?
Grinding in a mortar works by pressing and rubbing the material between pestle and mortar wall, the long-established way of triturating a sample by hand; the machine does the same work mechanically, so every batch receives the same treatment. The operator chooses the mortar and pestle material to suit the sample's hardness and to keep abraded tool material from affecting the analysis, loads 10 to 190 ml of feed no coarser than 8 mm, and grinds it dry or wet. The grinding set can be cooled or heated to suit the material. Ashes, clinker, drugs, food and plant samples come out at approx. 10 µm, ready for chemical or physical analysis.
What to Specify When Ordering
- Quantity — the number of mortar grinders required.
- Grinding tool material — hardened steel, stainless steel, tungsten carbide, agate, sintered aluminium oxide, zirconium oxide or hard porcelain.
- Supply voltage — the version needed, for example 230 V, 50 Hz or 120 V, 60 Hz.
Frequently Asked Questions
How fine can the Mortar Grinder grind a sample?
It prepares samples to an analytical final fineness of approx. 10 µm, starting from feed material with a maximum size of 8 mm.
What batch sizes can be ground?
Each batch, or feed volume, can be from 10 to 190 ml, and the grinding chamber itself has a volume of 700 ml.
Which mortar and pestle materials are offered?
Grinding tools come in hardened steel, stainless steel, tungsten carbide, agate, sintered aluminium oxide, zirconium oxide and hard porcelain, so the material can be matched to the sample being prepared.
Can it handle wet or pasty material?
Yes. It grinds, mixes and triturates both dry and wet, and handles soft, hard, brittle and pasty feed material, including suspensions and pastes of high viscosity.
Can the grinding set be cooled or heated?
The grinding set can be both cooled and heated, so the temperature of the material can be kept suitable for samples that are sensitive to heat or easier to work when warm.
What power does the grinder draw?
It uses a 1-phase connection and consumes 250 W at 230 V, 50 Hz or 290 W at 120 V, 60 Hz; the supply requirement given is 220–240 V, 50 Hz.
OEM Manufacturer
Buyers of the Mortar Grinder deal directly with its maker, Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd), whose works are at Plot No. 43, Industrial Park, Sector 2, Growth Center, Saha, District Ambala, Haryana, India. The company designs, makes and tests sample preparation and sampling equipment such as mills, homogenisers and samplers, supplies engineering colleges, polytechnics, technical training institutes and research laboratories in India and overseas, and builds to institution-specific requirements on request. Tender details are on the Tenders/OEM page.
Related Sampling and Sample Preparation Equipment
- Homogenisers with PTFE or glass pestles — tissue homogeniser sets with PTFE or ground-glass pestles and 0.18 to 0.23 mm clearance.
- Planetary Ball Mills — single-station planetary mill with 12 to 500 ml jars grinding to below 1 µm.
- Ultrasonic Homogeniser Cup Booster — 12 ml titanium alloy sonication cup for intensive ultrasonic treatment of small samples.
- Sample Tester Xtractor — 10-station pharmaceutical sample homogeniser stirring at 1500 to 6000 rpm with 20 to 80 °C monitoring.
See the full Engineering Lab Instruments range.
Request a Quote
For this and other engineering lab instruments, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. Quotations are given on request: send the number of grinders, the grinding tool material and the supply voltage required and your delivery location through the contact page, or add the Mortar Grinder to the enquiry cart from this page.
Last updated: October 2026
