Accelerated Curing Tank Manufacturer,Supplier and Exporter in India

Product Code : EL-CTLE-10293
Engineering Labs Equipment is a leading Accelerated Curing Tank Manufacturer,and suppliers in India,
Accelerated Curing Tank
This curing tank has been designed to accommodate 150mm / 70.6mm cube moulds and upto 36/72 cube mould can be cured in one go.
The tank is fully insulated, comes complete with a hinged lid, heater, thermostat and re-circulated pump.
The tank is heated by an immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35° C or 100° C ± 2° C / 27° C +2° C, expect for the 15 minutes after immersion of the freshly made specimens.
Provision of two removable racks allows free circulation of water around each mould.
The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank.
This special curing tanks have been designed for hot water curing or steam curing in accelerated strength concrete.
The interior is made from stainless steel.
The electronic programmer can control up to four test cycles with different thermal gradients and curing time to a defined temperature value for a complete automatic curing cycle.
The control panel include a 28 column thermal printer.
General Properties:
24 Hour cycle from time of mixing.
Controlled 35° C or 100° C ± 2° C Curing Temperature for concrete.
Controlled 27° C ± 2° C Curing Temperature for grey cement.
Standards: ASTM C684 | BS 1881:112
Contact ELE for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best and renowned engineering educational equipment, engineering equipments exporters, engineering equipments suppliers, engineering equipments supplier, engineering educational equipments, engineering equipments manufacturers in Ambala, India.