Knife Mill Grindomix
Product Code : EL-ELI-11032
Knife Mill Grindomix (code EL-ELI-11032) is a laboratory knife mill for size reduction, homogenisation and mixing of foodstuffs and similar samples, including material with a high water, oil or fat content. Four sharp blades driven by a speed-controlled industrial motor take the feed to a final fineness below 300 µm, and the mill has autoclavable grinding tools, a digital display of grinding time and speed, interval operation and memory for 10 parameter combinations.
Get a quote: use the Add To Cart enquiry button below, or send your quantity and delivery location through the contact page.
Specifications
| Parameter | Detail |
|---|---|
| Use | Size reduction, homogenisation and mixing |
| Suitable substances | Material with a high water, oil or fat content; dry, soft and medium-hard products |
| Feed material | Soft, medium-hard, elastic, dry, fibrous, or containing water, fat or oil |
| Application examples | Oil seeds, pharmaceutical materials, plant materials, sausages, soap, spices, vegetables |
| Fields of application | Agriculture, biology, food, medicine/pharmaceuticals |
| Blades | Four sharp blades |
| Final fineness | < 300 µm, with reproducible grinding and homogenisation of foodstuffs |
| Motor | Speed-controlled industrial motor |
| Grinding tools | Autoclavable |
| Display | Digital display of grinding time and speed |
| Operating mode | Interval operation possible |
| Parameter memory | 10 parameter combinations can be stored |
| Optional lid | Gravity lid for automatic adjustment of the grinding chamber volume |
| Electrical supply | 220–240 V, 50–60 Hz |
| Product code | EL-ELI-11032 |
| Manufacturer | Engineering Lab Equipment, Ambala, Haryana, India |
What Is the Knife Mill Grindomix Used For?
Food and feed analysis needs a test portion that represents the whole sample, so moist, fatty or fibrous material is first cut down and blended into an even mass before fat, moisture or residue tests. The operator loads the sample into the grinding chamber, sets the speed and grinding time on the digital display or recalls one of the 10 stored parameter combinations, and runs the four blades either continuously or in intervals. The optional gravity lid adjusts the chamber volume automatically, and the autoclavable tools can be sterilised between batches. The result is a homogeneous sample with a final fineness below 300 µm, ready to be weighed out for analysis.
What to Specify When Ordering
- Quantity — the number of knife mills required.
- Gravity lid — whether the optional gravity lid for automatic adjustment of the grinding chamber volume is wanted.
Frequently Asked Questions
Which kinds of sample can the knife mill process?
It takes soft, medium-hard, elastic, dry and fibrous feed material, as well as material containing water, fat or oil. Examples given are oil seeds, plant and pharmaceutical materials, sausages, soap, spices and vegetables.
How fine is the ground product?
For foodstuffs the mill grinds and homogenises to a final fineness below 300 µm, and the grinding can be reproduced between runs.
Can grinding settings be saved and repeated?
Grinding time and speed are shown on a digital display, and 10 parameter combinations can be stored for later use. Interval operation is also possible for samples that need it.
Can the grinding tools be sterilised?
The grinding tools are autoclavable, so they can be sterilised in an autoclave between batches, which suits microbiological and pharmaceutical sample preparation.
What does the optional gravity lid do?
The gravity lid is offered as an option. It sets the grinding chamber volume automatically, so the chamber adapts to the amount of sample being ground.
What electrical supply does the mill need?
The electrical supply data given for the mill are 220–240 V at 50–60 Hz, and the blades are driven by a speed-controlled industrial motor.
OEM Manufacturer
Engineering Lab Equipment (Engineering Labs Equipment Pvt Ltd) builds the Knife Mill Grindomix at its works in Saha, District Ambala, Haryana (Plot No. 43, Industrial Park, Sector 2, Growth Center). Its sample preparation and sampling equipment such as mills, homogenisers and samplers go to engineering colleges, polytechnics, technical training institutes and research laboratories in India and abroad, and equipment can be made to an institution's own requirements. For tenders and OEM supply, see the Tenders/OEM page.
Related Sampling and Sample Preparation Equipment
- Homogenisers with PTFE or glass pestles — tissue homogeniser sets with PTFE or ground-glass pestles and 0.18 to 0.23 mm clearance.
- Planetary Ball Mills — single-station planetary mill with 12 to 500 ml jars grinding to below 1 µm.
- Ultrasonic Homogeniser Cup Booster — 12 ml titanium alloy sonication cup for intensive ultrasonic treatment of small samples.
- Sample Tester Xtractor — 10-station pharmaceutical sample homogeniser stirring at 1500 to 6000 rpm with 20 to 80 °C monitoring.
See the full Engineering Lab Instruments range.
Request a Quote
For this and other engineering lab instruments, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India. For a price, send the number of knife mills and whether the optional gravity lid is required and the delivery location through the contact page; the Add To Cart button on this page also adds the Knife Mill Grindomix to an enquiry.
Last updated: October 2026
