K-Slump Tester

K-Slump Tester

Product Code : EL-CTLE-10313

Quick Answer: The K-Slump Tester is a device for in-place measurement of the workability and degree of compaction of fresh concrete after placement in the forms, with results that correlate to the standard slump test. It can be used for in-situ measurements or inside test moulds and forms; a probe with a calibrated hollow tube (20 mm dia.) is inserted into the concrete up to the level of the disc, and after 60 seconds a measuring rod is lowered onto the surface of the concrete and the K-slump is read directly on a scale. It includes a correlation chart and instructions, has a total length of 300 mm, weighs approximately 500 g, and conforms to ASTM C1362.

K-Slump Tester for in-place measurements indicates correlation to the slump test. This device is used to determine the workability and degree of compaction of fresh concrete after being placed in the forms, and it can be used for in-situ measurements or inside test moulds and forms. Results can be correlated against the slump test, and the probe determines workability of concrete and the degree of compaction; it includes a correlation chart and instructions.
The operation is very simple: insert the tester into the concrete up to the level of the disc, and after 60 seconds a measuring rod is lowered onto the surface of the concrete and the K-slump is read directly on a scale. The calibrated hollow tube has a dia. of 20 mm.
Total length: 300 mm
Weight approx.: 500 g

Standards: ASTM C1362

For this and other concrete testing lab equipment, schools and colleges can contact Engineering Lab Equipment, a manufacturer, supplier and exporter based in Ambala, India.

Last Updated: September 2026

Related Products: Tamping Rod, Concrete Test Hammer Schmidt Hammer N-Type, Jolting Apparatus

   

Office Address

Works:Engineering Labs Equipment Pvt Ltd Plot No. 43, Industrial Park, Sector 2, Growth Center, Saha, District Ambala, Haryana. Ambala, Haryana, India

[email protected]

Follow Us